High Accuracy Through Coating measurement Ultrasonic Thickness Gauge

High Accuracy Through Coating measurement Ultrasonic Thickness Gauge

Model No.: UTG440

Description:

Thickness Measurement Range:

0.65 ~400mm(Steel),

0.3~200mm(Glass) 4~80mm(High temperature), 3~50mm(Gray Iron)

THROUGH COATING ULTRASONIC THICKNESS GAUGE

The ultrasonic thickness gauge UTG440 featured as cost-efficiency and designed to make accurate measurements on steel, cast iron, aluminum, red copper, zinc, quartz glass, polyethylene, PVC, gray cast iron and nodular cast iron. Thickness measurements are made from oneside of the material with no need to cut the part.

The thickness gauge offer various practical measurement features such as Through coating

measurement for gauging thickness of a painted object without removing the non mental coating •

Automatic Probe Recognition that recognizes transducer types, Field Calibration of all materials

Sound velocity range 509 up to 18699m/s • 2000 readings memory • Data output to PC •

High-Low Limits setting •4 digit LCD display with settings • Backlight display for dark environment

and adjustable.

FEATURES

• Through coating measurement for gauging thickness of a painted object without removing the

non mental coating.• Thin coating mode and thick coating mode

• Available for gauging various materials such as metal, glass, plastic, rubber and etc.

• High measurement accuracy and wide range gauge applications • Suitable for pipe gauging.

• Whole range transducer models are available for almost all kinds of application, including coarse

grain material gauging and high temperature applications (Max. temperature up to 300°C).

• Adaptive probe function built in: Patent technology of automatic probe recognition: Automatically recognizing for probes allowing the gage to match with probes.

• Power on automatic testing function contributing to measurement accuracy increasing.

• Auto power off detection and customizing power off configuration.

• Probe Zero function, Sound Velocity Calibration function.

• 9 velocities built in and programmable.

• Several practical measurement modes available: Standard Mode, Scanning Mode, Difference Mode, Average Mode, Maximum limitation Alert Mode, High Temperature Mode(Should be matched with high temperature probe).

• 8 button keyboard designing for convenient shortcut operations for Probe-Zero function, One-Point and Two-Point Sound-Velocity-calibration, as well as numerical adjusting with direction key control.

• Automatic Data Storage function: group data storage mode, and storage capacity for each group optional.

• Large data storage capacity, Max. up to 2000 groups.

• Special function: USB data interface communication, easily accomplishing data transferring with PC and outputting data with “.txt”

• Metric and imperial free convertible.

SPECIFICATIONS

Thickness Measurement Range:0.65 ~400mm(Steel), 0.3~200mm(Glass)

4~80mm(High temperature), 3~50mm(Gray Iron)

Notes: Thickness range depends on material transducer type, surface condition and temperature.

Measuring Rang(Through Coating):3 mm -20 mm

Material Velocity Range:509~18699m/s

Measuring Accuracy:±0.05mm

Display Accuracy: 0.01mm / 0.1mm

Scanning Rate:2~20 times/sec.

Scan Velocity: 2times/s~20times/s

Frequency Bandwidths: ~10MHz

Measuring lower limit of pipes: (Depend on the probe)

Φ15mm×1.0mm (Probe: 5MHz, Φ10mm)

Φ10mm×1.2mm (Probe: 7.5MHz, Φ6mm)

Display Mode:128×64 matrix LED

Power supply:2 AA Alkaline Batteries

Operating Time: 280 hours typical battery life,

100 hours continuous with backlight on Operating Temperature Range:

-10°C~50°C(Ambient Environment)

-10°C~300°C(High Temperature Mode)

Gage Size:136 mm×72 mm×20mm

Gage Weight: 176g(Including Batteries)

Standard Accessory

• Gage One Set

• Probe One Set(5MHz, Φ10mm)

• Couplant One Bottle(30ml, Glycerin)

• Battery: 2 AA Alkaline Batteries

• Guide Manual

• Hermetic Plastic Kit (18cm X 15cm X10cm)

• USB Cable

• Software Disk

WELCOM E TO PRIDE INSTRUMENT

SHENZHEN PRIDE INSTRUMENT INC,Founded in 2001, our company specializes in development,manufacturing,marketing and sales of measurement instruments and equipments.We have been operating on the four management concepts: Purpose, Responsibility, Innovation and Devotion.

Purpose:

We insist on the best quality goods and serve all Customers is the first priority.

Responsibility:
We do not only provide our customers with the optimal and the most useful products but also the most professional technical supports.

Innovation :
Our products are constantly innovated to meet customer demands.

Devotion：
We will devote to produce all measurement products for all customers,OEM,ODM and also we will design measurement projects for our customers.

And we can do more, if any products not cover in our productlines,pls also inform us,we will manufacture or offer to you.We welcome new associations and relationships for progressive business and working together.

Certificate

PRIDE has been devoted to innovations and R&D unceasingly and has accumulated years of experiences in design and manufacturing. Our products sold all over the world,our friends are all over the world. our company introduced the ISO9001 International quality assurance operation system,our products approved by CE,ROHS.