Polish Treated Agitated Filter Dryer Fixed Chassis ISO9001

Fixed Chassis Polish Treated Agitated Filter Dryer Made In China

1. Our brand:

Juneng Machinery Group is a global group company specializing in the manufacture of filters, centrifuges and pressure vessels. It consists of Juneng Machinery (China) Co., LTtd., Jiangsu Juneng Machinery Co., LTD., Jiangsu Hexiang Biochemical Equipment Co., Ltd. Respectively in Hong Kong, Nanjing, Wuxi, Yixing has a large production base. Mainly engaged in filtration equipment, centrifugal separation equipment, evaporator, industrial pumps, pressure vessels and non-standard research, development, manufacturing and sales, has become the domestic filtration separation and pressure vessel industry leader, but also an important global supplier.

Jueng Company has more than 30 years of design and manufacturing experience, with more than 50 patented technologies, products to achieve advanced, marketization, scale, industrialization development, market coverage of more than 80%, successfully used in environmental protection, chemical, pharmaceutical, oil, food, beverage, mineral, paint and other industries, and has a very good reputation and popularity.

2. Application of Pressure Nutsche Filter:

Solid material recovery, solvent recovery, washing, flammable, explosive and highly toxic occasions such as pesticides, pharmaceuticals, chemicals and dyes.

Use occasions of the two-in-one filter, such as: diphosphate, glyphosate, inulin pesticides, vitamins, penicillin and other occasions that need washing

The three-in-one filter is mainly used for washing, drying and solvent recovery (toluene, methanol, ethanol, ethyl acetate, cyclohexane, etc.).

3. Advantages of Pressure Nutsche Filter.

1. System closure: This equipment is a fully closed system, which can completely avoid the air pollution caused by solvent in the production process and reduce the occurrence of poisoning accidents caused by contact with toxic substances.

2. Complete recovery: materials and solvents are almost completely recovered, avoiding waste caused by material omission and solvent volatilization, which has great economic benefits, especially when the value of materials and solvents is high.

3. Simultaneous drying: filtration, cleaning and drying can be completed in the same equipment. The vessel wall can be equipped with a heating jacket to enable drying operation.

4. Continuous operation: filtration and drying can be carried out in a continuous system without processing wet filter cake. A dryer can be connected under the filter so that the wet filter cake can be directly discharged into the dryer, and the dried product can be mechanically transported to the weighing, packaging and other sections.

5. Save manpower: a simple trained non-technical personnel can complete the operation. No technician is required for opening, closing, automatic feeding and automatic discharging

6. Thorough cleaning: the filter cake can be thoroughly cleaned because of the automatic spraying and re-pulping functions of this equipment. In addition, the amount of washing liquid is less than that of other types of equipment, which can reduce the amount of sewage discharge and the cost of wastewater treatment.

7. Clean production: This multi-function filter drying system is equipped with dust catcher, which can completely collect the dust generated after drying, and can meet the production and operation requirements of high cleanliness.

4.Specifications of GXG-1600

5. Working Principle of Pressure Nutsche Filter:

1: The suspension in the reactor is injected into the filter by its own gravity or through the pump, and then vacuumized in the filtrate receiving device, which is connected to the filtrate outlet.

2: The filtrate is pumped and filtered to the receiving device through the filter bed, and the filter cake is gradually formed on the filter bed.

3: When most of the filtrate is extracted, the filter cake deposited on the filter bed may also contain 5% - 20% solvent, which is related to the nature of the congeners in the suspension.

4: After the completion of the first filtration, if necessary, spray and wash, start the agitator for reverse mixing, so that the filter cake can be suspended again.

5: By operating the agitator, you can also gently squeeze the filter cake to squeeze out the residual liquid.

6: In order to remove the residual liquid or solvent in the filter cake as much as possible, the filter can be added with a jacket, in which steam or hot water is heated and dried. The top and bottom of the filter are vacuumized at the same time, and the residual solvent is volatilized, concentrated and recycled through the condenser on the receiving device. For some materials, the above process can be carried out without additional dryer.

7: After that, through the rotation and simultaneous downward movement of the agitator in the discharge direction, the agitator scraper will scrape out the filter cake layer by layer in order, and the filter cake can be automatically discharged from the discharge port.

8: Schematic diagram of agitator paddle and scraper.

Juneng Machinery Group is a global group company specializing in the manufacturing of filters, centrifuges, and pressure vessels. It consists of Juneng Machinery (China) Co., Ltd.,  and Wuxi Hexiang Equipment Biochemical Co., Ltd. We have large production bases in Hong Kong, Nanjing, Wuxi, and Yixing. Mainly engaged in research, development, manufacturing, and sales of filtration equipment, separation equipment, and pressure vessels, it has become a leader in the domestic filtration separation and pressure vessel industry and an important global supplier

The company is proud to be the leader in such industry with 80% domestic market share in Oils & Fats industry,Chemical industry, Pharmaceutical industry, Beverage industry, Petrol-chemical industry, and now is one of the well-known producers and suppliers in the world. Our products are also exported to clients in such countries and regions as USA,German, Korea,Japan, Pakistan, Malaysia, Singapore, Vietnam and so on.

We actively participate in various domestic and foreign exhibitions such as ACHEMA and Canton fair

In recent years, our company has introduced a series of advanced equipment including Filter, Separator, Decanter centrifuge and pump. In addition, we have obtained CE certificates, ASME U certificate and ISO 9001 certificate etc. 

ASME U Certificate

The company now areas 280,000 square meters in Nangjing City and Yixing City of Jiangsu Province.We have more than 1100 people employees and equipped with over 1500 units of advanced production equipment and test instrumentation.

Office

Website:

https://chinajuneng.en.alibaba.com

Contact : Wechat