
Our KY series borehole drilling rig is an economical drilling solution. As a piece of advanced drilling equipment, it is constructed on the basis of foreign technologies. Various special designs have made this self-propelled drilling machinery suitable for surface mine. It can be used for the construction of railway, road, hydroelectric power station, building, as well as in the quarry and surface mine.
Equipped with our air compressor and DTH hammer, the borehole drilling rig can drill blastholes (such as pre-splitting blasting hole) and anchor cable holes in horizontal, vertical and inclined directions. The rock hardness should be in a proper range (F = 6-20). The hole diameter could be from 80mm to 140mm, while the economical drilling depth is from 10m to 25m.
Our KY100 low pressure crawler drilling rig, as an excellent rock drilling machine, has been specially designed. Its reliable and powerful components give the drilling crawler great drilling performance.
Feature
1. Powerful and reliable motor
A double cylinder diesel engine is used. It features high power
output and great gradeability. The engine comes with a three level
filtering device which consists of air inflow adjuster, desert air
filter, and fuel filter. Thus the low pressure crawler drilling rig
has strong adaptability to bad working environments. The engine's
service life is also enhanced.
2. Flexible drill arm
The active drill boom can adjust the drilling angle and hole's
height by controlling the stretching length of the oil cylinder.
Thus the drilling ability and range are both extended.
3. Reliable hydraulic pump assembly
Two gear pumps are adopted for the oil supplying, making the low
pressure crawler drilling rig much safer. The gear transmission and
flexible coupling mechanism is used, so the structure is more
compact, while the operation is more stable.
4. Reliable hydraulic system
An extra oil cooling device is installed to eliminate the oil's
thermal influence to the system.
Specifications:
Model | KY100 Low pressure crawler drilling rig |
Rock hardness | F = 6-20 |
Hole diameter | Ф 80-105mm |
Economical drilling depth | 20m |
Pressure | 0.5-0.7Mpa |
Air consumption | ≥ 10m³ /min |
Rotating speed | 0-65r/min |
Lifting capacity | 15000N |
Drill rod specification | Φ 60 × 2000mm |
Gradeability | 30° |
Ground clearance | 254mm |
Walking speed | 2km/h |
Drill arm rising angles | Down 35°, Up 60°, Total 95° |
Drill arm swing angle | / |
Carriage swing angle | Left 11.5°, Right 36.5°, Total 48° |
Carriage pitch angle | Down 118.5°, Up 23.5°, Total 142° |
Carriage compensation | 900mm |
Overall dimension (L×W×H) | 4100 × 2030 × 3100mm |
Total weight | 3200kg |
Note | Pneumatic-hydraulic driving mechanism |
Recommended spare parts for KY100
Drill bit diameter | 90mm |
Drill rod (Diameter×L) | Φ 60×2000mm |
Drill hammer | 90mm |
Shanghai Rotorcomp Screw Compressor Co., Ltd
Shanghai Rotorcomp Screw Compressor Co., Ltd founded in 1999, our company was a manufacturer of
piston air compressors from 1985-1999. After 2000 our company
headquarters moved to the international metropolis Shanghai and
focused on screw air compressors, pressure vessel, refrigeration
dryer, adsorption dryer and air filters with the support of
Rotorcomp Verdichter Gmbh in German.
Shanghai Rotorcomp Screw Compressor Co. Ltd., Shanghai Ziqi Container
Co.Ltd. have been cooperated with 2010 Beijing Nankou Railway
Transit Machinery Co. Ltd., which belongs to China CNR Corporation
Limited, as the strategic cooperation partner.
The Beijing Nankou company has processing equipment more than 100
sets, including large-scale precision equipment 90 sets and
imported equipment 70 sets. Such as Hardinge double-ended grinder,
Toshiba horizontal machining center, BW CNC vertical and horizontal
machining center, Holroyd rotor profile grinder and Zeiss 3D
measuring machine.
From 2017, we successfully develop the new generation oil-free air
compressors with the ISO9001 certificate, ISO14001 certificate,
energy-saving product certificate, OSHAS (Occupation Safety and
Health management System) certificate, vonTUV certificate and CE
Certificate. According to the Standard European Din40080, our air
end and air compressors have won the praises of the customers over
45 countries worldwide.
Followed the principle and policy of " First-class Quality,
First-class Service" Shanghai Rotorcomp insists on improving
ourselves into a first-class supplier for the air compressor.