CE Lube Oil Separator / Centrifugal Moisture Separator Drived by Motor

stable operation centrifuge fuel oil water separator reduce the separation material corrosion

Operation Principle

To separate, laminate or sedimentate the solid particles in liquid by getting different sedimentation speeds under centrifugal force field for light/heavy phase or solid phase that are of different densities and not solvable each other in liquid mixture (turbid liquid).

The material [turbid liquid] enters drum through feed pipe, by the powerful centrifugal force field, the material passes the separating compartment of a set of disc bunches, by taking the neutral holes in the disc as separating face, the liquid with higher specific gravity (heavy phase) will move out the holes along the disc wall toward the big centripetal pump (upper); the heavy sediment (sundries, fatlute) accumulate at the sediment area; the liquid with lower specific gravity (light phase) will move inward and upward along the disc, assemble and flow to the small centripetal pump (lower), the light/heavy phase will respectively be output by big and small centripetal pump.

When the control valve guides the seal water into the drum rotating at high speed, it will enter into the operation water cavity below the slide piston, the generated centrifugal pressure will put upward the slide piston to press tight the seal ring on the drum cover, close the sediment-extraction port, so as to seal the operation cavity of the drum.

When the control valve guides the sediment-extracting water into upper cavity of the seal seat, the generated centrifugal pressure will press downward the action slide, this will overcome pressure from the bearing spring, open three vent valves, the seal water in the lower cavity of the slide piston will discharge rapidly, under centrifugal pressure of material being processed in the drum, the slide piston fall down, the accumulated heavy sediment will be discharged rapidly from the sediment-extracting port on the drum.

Application:

The marine separator is mainly used for cleaning up the moisture and mechanical impurity in the fuel ( Light diesel oil, heavy diesel oil, fuel oil) and lubricating oil of ships and diesel engine,which is good to reduce the abrasion and prolong its service life. The heavy diesel oil is separated by our separator, which can replace the light diesel oil for using so as to reduce the cost of production greatly.

Company:

Juneng Machinery Group is a global group company specializing in the manufacturing of filters, centrifuges, and pressure vessels. It consists of Juneng Machinery (China) Co., Ltd., Jiangsu Juneng Machinery Co., Ltd., and Wuxi Hexiang Equipment Biochemical Co., Ltd. We have large production bases in Hong Kong, Nanjing, Wuxi, and Yixing. Mainly engaged in research, development, manufacturing, and sales of filtration equipment, separation equipment, and pressure vessels, it has become a leader in the domestic filtration separation and pressure vessel industry and an important global supplier.

The total area of the enterprise is 500000 square meters, with a building area of 285000 square meters and annual sales exceeding 800 million yuan; There are currently over 1000 employees, including 50 with senior professional titles and 320 with intermediate professional titles. The company has over 2000 sets of various medium to large production equipment, with a single lifting crane weighing 100T. The maximum manufacturing capacity of a single equipment can reach 16 meters high and weigh 200T. Annual production of over 800 centrifuges, over 1500 separators, over 5000 filters, and over 1000 pressure vessels and non-standard equipment.

FAQ

Juneng Machinery Group is a global group company specializing in the manufacturing of filters, centrifuges, and pressure vessels. It consists of Juneng Machinery (China) Co., Ltd.,  and Wuxi Hexiang Equipment Biochemical Co., Ltd. We have large production bases in Hong Kong, Nanjing, Wuxi, and Yixing. Mainly engaged in research, development, manufacturing, and sales of filtration equipment, separation equipment, and pressure vessels, it has become a leader in the domestic filtration separation and pressure vessel industry and an important global supplier

The company is proud to be the leader in such industry with 80% domestic market share in Oils & Fats industry,Chemical industry, Pharmaceutical industry, Beverage industry, Petrol-chemical industry, and now is one of the well-known producers and suppliers in the world. Our products are also exported to clients in such countries and regions as USA,German, Korea,Japan, Pakistan, Malaysia, Singapore, Vietnam and so on.

We actively participate in various domestic and foreign exhibitions such as ACHEMA and Canton fair

In recent years, our company has introduced a series of advanced equipment including Filter, Separator, Decanter centrifuge and pump. In addition, we have obtained CE certificates, ASME U certificate and ISO 9001 certificate etc. 

ASME U Certificate

The company now areas 280,000 square meters in Nangjing City and Yixing City of Jiangsu Province.We have more than 1100 people employees and equipped with over 1500 units of advanced production equipment and test instrumentation.

Office

Website:

https://chinajuneng.en.alibaba.com

Contact : Wechat