
TUV certified twin core Solar Cable 10mm2 Australian Standard PV1-F DC 1800V
TUV PV Cable Fire Resistant Cables Description:
2 PfG 1169/08.2007 covers the single core flexible cables (wires)
used in DC sides of photovoltaic system which max. permissible DC
voltage is 1.8kV(line to line, non ground system). The product is
applicable to the environment which safety degree is under Class
II,and it can be parallel used.
CABLE STANDARDS
The product is manufactured according to the 2 PfG 1169/08.2007"The
Requirements of Photovoltaic Cable"standard. And our product own
the TUV Certificate.
The electrical and dimensional properties of this product are
measured by the Technical and Quality Assurance department at the
JiangNan Cables laboratory. Cable performance in respect of
conductor resistance, construction quality (workmanship),
dimensional consistency, and other parameters are verified to
published standards and approved
TUV PV Cable Fire Resistant Cables Technical Data:
1. Nominal Voltage:U0/U=600/1000V AC, 1000/1800V DC ;
2. Test Voltage:6500V,50Hz,5Min.
3. Temperature Rating:45oC upto+125oC, -40oF upto+257oF, Ambient
temperature:25years(TUV) -40oC upto+90oC, -40oF upto+194oF,
Max.Short circuit temperature:280oC, +536oF.
4. Bending Radius:Fixed installation>4X Occasionally moved>5X
TYPE:TWIN CORE SOALR CABLE | PART NO:PV1-F 2X10mm2 | ||
CONSTRUCTION: | |||
CONDUCTOR | MATERIAL | Tinned copper | |
CONSTRUCTION | 80/0.4mm | ||
RESISTANCE | 1.95 Ω/km (MAX. at 20℃) | ||
INSULATION | MATERIAL | XLPE | |
DIAMETER | 2.0±0.1 mm | ||
THICKNESS | 0.6±0.10 mm | ||
COLOUR | Black / Red | ||
JACKET | MATERIAL | XLPE | |
DIAMETER | 17.6 X 8.5mm | ||
THICKNESS | 0.6±0.10 mm | ||
COLOUR | Black | ||
Electrical Data | Rated Rating | AC 0.6/1KV DC1800V | |
Rated temperature | -40 ~+90,Dry and Wet | ||
60℃ rated current | 98A | ||
Test voltage | 3.0KV AC | ||
Weathering Resistance | Sun Res. | ||
MARKING | TüV 2 PfG 1169 PV1-F 2×10mm2 NINGBO PNTECH NEW ENERGY CO.,LTD TÜV SÜD approved VDE-AR-E 2283-4:2011-10 |
Advantage:
1. 99.9% high-purity oxygen-free copper: high quality tin-plated copper, high purity, anti-aging, high electrical conductivity, low loss, strong current carrying capacity, high corrosion resistance, and can adapt to outdoor harsh environment.
2, low eccentricity: thickness uniformity, effectively prevent the current breakdown fire, to ensure safety.
3. Double protection: The solar photovoltaic cable adopts insulation and Jacket double protection structure to extend the service life of the cable.
4, high-performance polymer materials: Insulating and jacket all use environmentally friendly low-smoke halogen-free flame-retardant cross-linked polyolefin materials, with wear-resistant, high temperature, oil, ozone, UV, high flame retardant properties.
5, strong flexibility: cable has a pressure, bending, strong toughness.
6, long service life: normal outdoor use, service life> 25 years
7, advanced equipment: The company has advanced foreign production, scientific research equipment, passed the ISO9001-2008 quality management system certification, IATF16949: 2016 quality management system certification.
Name | PV Cable |
The product description | Widely used in indoor and outdoor solar installations, electrical installation, indoor and outdoor, explosion-prone areas, factories, industrial and agricultural industries. |
Product features | Low smoke without halogen, good cold, ultraviolet, ozone - resistant and weather - resistant. |
Flame retardant, cutting resistance and penetration resistance. | |
Cable protection level Ⅱ level. | |
With 150 ℃ photovoltaic cable radiation as insulation materials, halogen free flame retardant is halogen-free, non-toxic modified polyethylene thin hengjing resin as the main raw material, add halogen-free, non-toxic, flame retardant, heat stabilizer, eliminate smoke agent, preservative, such as fertilizer, does not contain halogen, heavy metals, phosphorus. | |
It conforms to ROHS, and the insulation resistance is small after immersion. | |
Electrical | 1. The dc resistance: the finished cable at 20 ℃ conductive wire core dc resistance is not greater than 5.09 Ω/km |
2. The insulation resistance: the finished insulation resistance of cable at 20 ℃ should not less than 1014 Ω. Cm, finished cable insulation resistance at 90 ℃ is not less than 1011 Ω. Cm | |
3. The sheath surface resistance: resistance of the finished cable sheath surface should be not less than 109 Ω. | |
Cable structure | Conductor: tinned copper wire 2.5, 4, 6, 10, 16 mm ^ 2 PV1 - F |
18, 16 and 14, 12, 10, 8, 6, 4, 2 mm ^ 2 PV wire | |
Insulation: > 0.5mm thick with low smoke and halogen material, and meet the specified limit of the customer. | |
Sheath: low smoke and halogen free material thickness > 0.5mm. | |
Detailed parameters | Ambient temperature: - 40 ℃ ~ + 90 ℃ |
The highest temperature of conductor: 120 ℃ (allow 5 s in short circuit temperature 200 ℃) | |
Limited voltage: AC0.6/1kv dc1.8kv. |
FAQ:
1. When can I get the quotation?
Within 24 hours of getting the inquiry, if you are very urgent to
get the price, please call us to give complete specifications about
the cable. price will be calculated soon.
2. How long about the delivery?
Usually within 3-4 working days after payment, mainly according to
the quantity.
3. What's your payment terms?
We accept T/T (bank transfer), L/C
4. Do you accept the customized order?
Yes, we do.
5. Do you offer OEM & ODM?
Yes. OEM & ODM are available.
Picture of twin core 10mm2 solar power cable
ZHEJIANG PNTECH TECHNOLOGY CO., LTD
ZHEJIANG PNTECH TECHNOLOGY CO. LTD.
It was founded in 2011 and has 10 years of experience in photovoltaic cable production. The company has passed ISO9001 management system certification. The photovoltaic cable series has passed the German TUV and China CQC certification. Certificate covers 1.5sqmm-25sqmm. Our product is produced by special photovoltaic materials, using advanced electron beam irradiation cross-linking technic. Our product can be used for a long time in an environment of minus 40 degrees, and with strong UV resistance. Main Products: Photovoltaic cables, Photovoltaic connectors,PV Junction Box, Solar PV connectors, solar photovoltaic Controllers, PV inverters for solar energy, photovoltaic systems, batteries, etc.
Due to our high quality and good service, our products have been exported to all over the world such as UK, USA, Mexico, Germany, France, Poland, Netherland, Sweden, France, Portugal, Spain, Italy, Australia, Singapore, Malaysia, Thailand, etc.And our products are approved by TUV, CE and ISO9001.
How are we doing it is Skilled , long –term employee , satisfied customers , modern equipment , no-compromise – for – quality values , full range of services , experience , and a sincere commitment to satisfying the requirement of our customers.
Quality product performance and good reputation, our products are not only successful sales in China, and have been exported to more than 120 countries and regions in the world, including: Germany, Japan, Italy, Russia, Japan, South Korea, Turkey, Brazil , India, the United Arab Emirates, Saudi Arabia and other countries, the products are subject to a great welcome and praise.
Our main goal is to conserve the environment through generating clean, sustainable and efficient energy in order to ensure a "greener future” for all mankind. We have the responsibility to increase awareness in renewable energy and assist households and business owners to Go Green and reduce their operational costs.
We attend SNEC in Shanghai every year to show our products to customers all around the world.