
NEMA34 Planetary Geared motor 48v 3000rpm 3 Phase
1. General Specification
Winding type: Star
Hall effect angle : 120 degree electrical angle
Shaft run out : 0.025mm
Radial play : 0.02mm@450g
End play: 0.08mm@450g
Max.radial force : 220N @20mm form the flange
Max.axial force : 60N
Insulation class : Class B
Dielectric strength : 500VDC for one minute
Insulation resistance : 100MΩ Min.,500VDC
2. Electrical Specification
Model | ||||||
Specification | Unit | JK86BLS58 | JK86BLS71 | JK86BLS84 | JK86BLS98 | JK86BLS125 |
Number Of Phase | Phase | 3 | ||||
Number Of Poles | Poles | 8 | ||||
Rated Voltage | VDC | 48 | ||||
Rated Speed | Rpm | 3000 | ||||
Rated Torque | N.m | 0.35 | 0.7 | 1.05 | 1.4 | 2.1 |
Rated Current | Amps | 3 | 6.3 | 9 | 11.5 | 18 |
Rated Power | W | 110 | 220 | 330 | 440 | 660 |
Peak Torque | N.m | 1.05 | 2.1 | 3.15 | 4.2 | 6.3 |
Peak Current | Amps | 9 | 19 | 27 | 35 | 54 |
Back E.M.F | V/Krpm | 13.7 | 13 | 13.5 | 13.7 | 13.5 |
Torque Constant | N.m/A | 0.13 | 0.12 | 0.13 | 0.13 | 0.13 |
Rotor Inertia | g.c㎡ | 400 | 800 | 1200 | 1600 | 2400 |
Body Length | mm | 71 | 84.5 | 98 | 111.5 | 138.5 |
Weight | Kg | 1.5 | 1.9 | 2.3 | 2.7 | 4 |
Sensor | Honeywell | |||||
Insulation Class | B | |||||
Degree of Protection | IP30 | |||||
Storage Temperature | -25~+70℃ | |||||
Operating Temperature | -15~+50℃ | |||||
Working Humidity | 85% or under 85% RH(non condensing) | |||||
Working Environment | outdoor(no direct sunlight),Non-corrosive Gas, Non-inflammable gas, No oil fog, No dust | |||||
Altitude | 1000m or under 1000m |
3. Gearbox Electrical Specification:
Reduction ratio | 4 | 5 | 10 | 16 | 20 | 25 | 40 | 50 | 100 |
Number of geartrains | 1 | 3 | |||||||
Transmission efficiency | 91% | 82% | |||||||
Rated torque | 50 N.m | 80 N.m | |||||||
Max rated torque | 100 N.m | 160 N.m | |||||||
L2 length(mm) | 75 | 90 |
Matching Stepper motor Driver: JKBLS300 JKBLS750
4. Dimensions: (Unit=mm)
5.The main parameters to be referenced in the selection of brushless DC motor are as follows:
Maximum torque: this can be obtained by adding the load torque, moment of inertia and friction. In addition, additional factors such as air gap air resistance influence the maximum torque.
Square modulus torque: can be approximately considered as the continuous output torque required for practical application, determined by many factors: maximum torque, load torque, moment of inertia, acceleration, deceleration, and running time, etc.
Speed: this is the required speed, which can be determined according to the speed trapezoidal curve of the motor, usually 10% margin should be left in the calculation.
6. Applications:
(Stepper motor, electrical motor,brake motor,motor driver,gear motor,bldc motor,brushless motor)
CHANGZHOU JKONGMOTOR CO.,LTD
Company Profile:
CHANGZHOU JKONGMOTOR CO.,LTD (Changzhou Jingkong Motor&Electric
Appliance Co.,Ltd)is an ISO9001 Professional manufacturer. Was
established in 2011 year. We are a professional manufacturer in
Changzhou city, China. Production Capacity exceeds more than 1
million motors per year. Our Company offers three major series of
products: Hybrid Stepper motors, Brushless Dc motor and Dc Brush
motor. We are always continues develop new type models.
We are also have several joint venture companies who specialized in
the production of AC servo motor, PM stepper motors, Spindle motor
and Motor drivers. We export our motors to more than 30 countries
Such as United States, Germany, Russia, Turkey, Brazil and so on.
Jkongmotor sold to major manufacturing Companies for Industry of
automation, medical and health care equipment, 3d printer machines,
packing devices, Information Technology, household appliance
products.
We have an Engineering team with many years of experience in application Engineering, design Engineering with the latest advances equipment. Our Engineering Staff provides the finest quality product with service after the product is delivered to our Customers.
Mission Of the Enterprise:
Let Customer Profit
Let Staff Prosperity,
Let Enterprise Development
Corporate Culture:
Customer First Hardwork Positive Energy
Responsibility Executive Force Integrity Gratefulness
Changzhou Jkongmotor Co., Ltd was a high technology industry zone
in changzhou, china. Our products used in many kinds of machines,
such as 3d printer CNC machine, medical equipment, weaving printing
equipments and so on.
JKONGMOTOR warmly welcome 'OEM' & 'ODM' cooperations and other
companies to establish long-term cooperation with us.
Company spirit of sincere and good reputation, won the recognition
and support of the broad masses of customers, at the same time with
the domestic and foreign suppliers close community of interests,
the company entered the stage of stage of benign development,
laying a solid foundation for the strategic goal of realizing only
really the sustainable development of the company.