DI Disc Stainless Steel coated , FBE Coated High Pressure Butterfly Valve

Ductile Iron Double Eccentric Butterfly Valve DI Disc Stainless Steel coated

Description:

AFC's Double Eccentric Flange Butterfly Valve (we call abbreviated FBGD) is a newly advanced design butterfly valve. With double eccentric design and soft rubber seal on the body, the operational toque is one of the lowest among all the butterfly valves and can be sealed in both directions,disc and stem are very strong without any deformation.

Size DN150-DN350mm,disc is flat shape, allowing bigger rubbish to flow through. DN350 to DN1200mm disc are arch shape with stronger ribs on the back, causing less compression and wearing of seal rubber to increase the life of rubber seal. Also, water head loss reduced a lot and turbulence minimized,thus flow through disc energy is saved and lowering the pumping cost.

Feature:

. The valve is made of DI body and DI disc.
. Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure.
. The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc.
. The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight
. The shaft and disc connection with tangential pin which can be exchangeable and provide
rigid connection.
. The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc.
. Epoxy coated interior and exterior.
. Valve design meets or exceeds EN 593.
. Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.

Opening Degree VS Flow Coefficient Kv

Material

DN100-DN500

DN600-DN1200

Dimension:

Alpine Flow Control (SuZhou) Co.,Ltd with major focus in the water valve design and manufacturing. The Management staff have over 30 years experience in the water valve design and manufacturing, combined with the high-tech electronics manufacturing experience of multi-national listed companies. This unique combination of traditional and high-tech industry management experience and skills have given us an advantage over the traditional valve manufacturer. More than 40% of our staff are technical staff with knowledge and experience in valve and mechanical design/manufacturing...

Proven and supported by on-going quality and reliability test. AFC has built it’s own in house reliability test laboratory to ensure that our products not only meet the international quality and reliability test specification such as the EN-1074-1/2 T-key and R-key test, but also comply to various international valves standards and specifications.
 

We already achieved WRAS certificate in 2011, and obtained FM approval in early of 2012,
and UL for gate valve. Today, we have got many international famous certificate for drinking water such as WRAS, NSF, AS, CE on certain products, and our product range has expended to double eccentric butterfly valve, rubber disc check valve ,non-slam check valve, both clean water & sewage water air valve, hydraulic control valve and penstock and we always focus on water system valves.
 

In 2018 year, our big plan is developing pressure management valves which has been proved to be a very helpful tool and economic way to save the leakage rate with limited investment and get a fast return in couple months and power savings

In addition, we have a special project team to focus on custom design and special requirement
 

Our Mission :
Be the market leader in Water Valve Flow Control
Company culture :
Technology through Innovation
Quality product and service through Quality people
Business growth through Cohesive partnership