
1. Coupling driving system
2. Highly competitive price
3. Economic running costs
4. ISO, GA, SGS certificates
Oil Injected Direct Driven Screw Compressor features:
1 Drives and electrics
The almost loss-free power transmission guarantees reliable,
high-performance compressor operation. The regular maintenance
requirement is reduced to lubrication of the motor. All the
electronic components are brand products of leading
manufacturers. rives and electrics.
The centrepiece of Direct-driven Screw compressor is the air end, which is constructed and manufactured with the most modern production methods in China. The optimal air end for your compressor can be used on a modulating basis. In frequency-controlled units, where the operating pressure changes, adjustments can also be made on the frequency controller to optimally adjust the speed of the compressor to the compressor performance.
Only electric motors from well-known manufacturers of protection class IP54/IP23 are used in our Direct-driven Screw compressor. As a standard, the drive motors are monitored both thermally (via the thermistor of the motor) as well as electronically(overload protection via the frequency inverter).
LGCD Direct-driven Screw compressor up to 132 kW are equipped with external separators that can be changed in a simple spin-off/spin-on process. Larger units have an internal separator cartridge. Due to the excellent separation efficiency of the system as a whole, the compressors can be used in the pressure range of 5.0 to 15.0 bar. Special pressures on request.
The frequency converter minimises idle times and optimises supply with fluctuating compressed air requirements. Start-up peaks are avoided and the compressor’s delivery rate is controlled continuously – that saves electricity costs! The total costs for your compressed air supply are significantly reduced and investment costs are amortised in the shortest possible time.
90KW air cooling compressor parameters
ITEM | UNIT | MODEL | ||||
LGCD-90 | ||||||
Free air delivery | m3/min | 17.00 | 15.30 | 14.00 | 12.00 | |
Max. working pressure | MPa | 0.7 | 0.8 | 1.0 | 1.3 | |
Compressor type | Oil inject screw compressor | |||||
Cooling type | Air cooling | |||||
Driven type | Direct driven | |||||
Inlet status | Temperature | ℃ | ≤45 | |||
Pressure | MPa | Atmospheric pressure | ||||
Relative humidity | ≤90% | |||||
Noise Level | dB(A) | ≤79 | ||||
Residual oil content | ppm | ≤2 | ||||
Drive rotor speed | rpm | 2970 | 2970 | 2970 | 2970 | |
Compressed air outlet temperature | ℃ | Ambient temperature+10 | ||||
Cooling air flow | m3/hr | 11200 | ||||
Control mode | Intelligent controller | |||||
Safety valve set pressure | MPa | 0.77 | 0.88 | 1.10 | 1.43 | |
Lubricating oil volume | L | 70 | ||||
Lubricating oil brand | ROTORCOMP | |||||
Compressed air outlet connection | DN80 | |||||
Dimension | L | mm | 1750 | |||
W | mm | 1200 | ||||
H | mm | 1500 | ||||
Net Weight | kg | 1850 | ||||
Motor | Model | Y2280-2 | ||||
Speed | rpm | 2970 | ||||
Rated Power | KW | 90 | ||||
Service factor | 1.2 | |||||
Protection type | IP23/IP55 | |||||
Insulation class | F | |||||
Startup mode | ʏ-Δ starting | |||||
Voltage | V | 380(Special on request) | ||||
Frequency | Hz | 50(Special on request) | ||||
Rated current | A | 166 | ||||
Weight of motor | kg | 566 |
Shanghai Rotorcomp Screw Compressor Co., Ltd
Shanghai Rotorcomp Screw Compressor Co., Ltd founded in 1999, our company was a manufacturer of
piston air compressors from 1985-1999. After 2000 our company
headquarters moved to the international metropolis Shanghai and
focused on screw air compressors, pressure vessel, refrigeration
dryer, adsorption dryer and air filters with the support of
Rotorcomp Verdichter Gmbh in German.
Shanghai Rotorcomp Screw Compressor Co. Ltd., Shanghai Ziqi Container
Co.Ltd. have been cooperated with 2010 Beijing Nankou Railway
Transit Machinery Co. Ltd., which belongs to China CNR Corporation
Limited, as the strategic cooperation partner.
The Beijing Nankou company has processing equipment more than 100
sets, including large-scale precision equipment 90 sets and
imported equipment 70 sets. Such as Hardinge double-ended grinder,
Toshiba horizontal machining center, BW CNC vertical and horizontal
machining center, Holroyd rotor profile grinder and Zeiss 3D
measuring machine.
From 2017, we successfully develop the new generation oil-free air
compressors with the ISO9001 certificate, ISO14001 certificate,
energy-saving product certificate, OSHAS (Occupation Safety and
Health management System) certificate, vonTUV certificate and CE
Certificate. According to the Standard European Din40080, our air
end and air compressors have won the praises of the customers over
45 countries worldwide.
Followed the principle and policy of " First-class Quality,
First-class Service" Shanghai Rotorcomp insists on improving
ourselves into a first-class supplier for the air compressor.