Armature Commutator Fusing Machine 50 - 60 Hz Rated Frequency Air Water Cooling

Automatic armature fusing machine motor commutator welding machine

General description

1.This series automatic commutator hot stacking machine is the special equipment which used for commutator hot stacking.

2.The machine is used for the starter of cars and motorcycle, DC motors, power tool motors, household appliances motors and series motors.

3.The machine adapts AC pulse. The whole machine is controlled by MITSUBISHI programmable controller from Japan; it could control the exact pre-pressing/welding/transposition/hold time effectively. The operation is free from interference.

4.The machine is turned on/off by the contact-free, large currency crystal module. It is free of noisy and sparks.

5.OP-320 panel, English display, digital adjustable, it`s convenient and easy for operation.

6.The welding machine uses water cooling internal circulation and has a built-in water tank. It does not need a water source.

7.The transposition of the machine adapts step-by-step impulse; driven by drivers and division by servo motor.

8.The vertical mechanical motion of the machine is driven by the cylinder; and the auxiliary electrode is driven by the linear bearing. It can work easy and has good contact with commutator and without damage to the commutator.

9.The current adjustment includes rough adjustment and precision adjustment, total 16 grades. The main transformer is 230V.

Technique Parameter

1. Voltage: 230 V

2. Rated frequency: 50-60 Hz

3. Rated power: 25 KVA

4. Welding wire diameter: Ф 0.06-1.6 mm

5. Welding diameter of rotor: Ф 100 mm

6. Welding length of rotor: 350 mm

7. Welding diameter of commutator: Ф 60 mm

8. Pressure of air source: 0.3~0.5 Mp

9. Cooling method: water cooling self-circulation + air cooling

Installation

1. The equipment should be placed in a dry place and prevent from dusts. There should not be any corrosive gas and flammable/explosive objects in the surrounding area.

2. Make the surrounding area level; adjust bolts of each position.

3. Correctly connect with the inlet power line; the wire diameter should be bigger than 4m㎡, and should use copper wire.

4. Correctly connect with the air pipe.

5. Completely check whether any part of the machine is loosen during the transportation. Correctly adjust the fastening points of each position.

6. Add water into the cooling water tank; the water should be around 90% of the capacity of the water tank.

Operation and touch screen

4.1 Operation

1. Connect machine to air source and power supply.

2. Switch the button to Miyachi.

3. Turn on machine power switch.

4. Switch the two buttons under the touch screen to [Auto" and [Run"

5. Switch the rough set to 2 and the accurate set to 8

6. Power on Miyachi.

7. Press [Stop" button. Then press the [Start" button to begin fusing.

The armature commutator spot welding machine pictue show

The motor rotor commutator hot staking and fusing machine pictue show

Ningbo Nide Tech Co., Ltd, adhering to the customer-centric concept, focuses on the stator, rotor and complete assembly of various motors, and provides customers with one-stop solutions for highly automated, intelligent and flexible production.

The company was established in 2010 and has 4 subsidiaries: Zhejiang Nide Automation Tech Co., Ltd., Jiangsu Nide Automation Tech Co., Ltd., Ningbo Nide International Co., Ltd.，Ningbo Lingfeng Danuo Property Service Co., Ltd. and 3 international affiliated company: NIDE India PVT, NIDE USA LLC，NIDE Wintech SRL.

After years of development, NIDE has gradually accumulated a certain influence and brand effect at home and abroad. At present, the products cover the professional manufacture of new energy motor stator and rotor, hairpin motor, automatic aluminum casting rotor line, brushless motor/ BLDC motor, universal motor, wheel hub motor, etc., which are used in new energy vehicles, household appliances, industrial motors, water pump motors, servo motors, etc. The company integrates R&D, production and sales, and wholeheartedly serves customers at home and abroad, aiming delivering value and achieving a win-win situation.

Focus on providing one-stop solution to motor manufacturing.

Three business divisions:

1. Motor manufacturing machines.

2. Motor components.

3. Technical consulting and turn-key service.

The Core business is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.

The second division is to supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.

The third division is to provide technical support and consulting, project support and turn-key service for some motor manufacturing.

With good service, unique philosophy, professional team and reliable quality, we win the worldwide customers’ confidence gradually. We directly and indirectly supply our products to more than 50 countries. Among the customers, many of them are the world-renown companies.

Application status

Ningbo Nide Machinery Equipment Co., Ltd., wishes is to provide world wide customers with one-stop service for the motor manufacturing.

Make motor, turn to Nide, everything will be easy ! 
Nide--Just for easy, our objective is not only to make motor manufacturing easier, but also strike for making life easier. 

Five Affiliated Companies

1.Ningbo Nide Tech Co., Ltd-www.nidegroup.com

Located at Hi-Tech District in Ningbo city, the industrial hub of China, and taking the advantage of strong technical and commercial team, Ningbo Nide Tech Co.,Ltd focuses on the R&D, marketing&sales,quality control and after service of the machines which are produced by its affiliated factories(Jiangsu Nide Automation Tech Co.,Ltd and Jiangsu Xiandian Mechanical Co.,Ltd.

Our wishes are to provide our customers with optimized full pack of solution to motor manufacturing. 

2.Jiangsu Nide Automation Tech Co., Ltd

Located in Suzhou, covering the workshop area of 9,000 square meters, with 102 employee, Jiansu Nide Automation-Tech Co., Ltd mainly manufacture stand along machine and fully automatic line for induction motor stator, BLDC motor winding machine, external rotor production machines, rotor assembly line, motor assembly line and other customized machine or production line.

The products are mainly applied for single and three phase induction motor, water pump motor, washing machine motor, air condition motor, fan motor, compress motor, electric bicycle motor, BLDC motor, servo motor, electric automotive motor, etc. some of our products are CE approved.

Strictly implementing the ISO 9001 system, equipped with the high precision machining facility, we ensure our products to meet what customers' exact needs.

3.Zhejiang Nide Intelligent Automation Co.,Ltd--www.nide-ai.com

Zhejiang Nide Intelligent Automation Co.,Ltd, which is wholly-owned by Ningbo Nide Mechanical Equipment Co.,Ltd, sitting in the industrial hub city Ningbo, mainly focus on the winding and assembly technology for all kinds of BLDC motor, including the stone along machine and fully automatic complete line. Meanwhile, we also customize some non-standard machines to cater for clients needs in motor manufacturing field.

Strict quality control system, plus strong technical team allow us to offer the reliable

machines to our customers.

Nide--Just for easy, is try to not only make motor manufacturing easier, customer easier,

but also strike for future life easier !

4.Ningbo Nide International Co., Ltd--www.nide-international.com

Sitting in the beautiful sea shore city--Ningbo, taking the advantage of advanced industries hub, perfect supply chain and convenient transportation, and integrating professional team with rich motor manufacturing experience , Ningbo Nide International Co., Ltd focuses on supplying the motor components one stop sourcing platform to our customers.

The products include commutator, ball bearing, shaft, carbon brush, insulation paper, thermal protector, magnet, fan, motor cover and lamination. Apart from these products, we also provide the service for the motor manufacturing technical consultant, project support and turn-key project.

With the decades experience in the motor manufacturing field, we deeply understand what the customer exactly demand, a significant motor components manufacturing net work and strict quality control system allow us to provide our customer with good quality products at reasonable price, our aim is to help customers to reduce the tiresome sourcing tension while acquiring the good quality products.