DIN 30670 Fusion Bonded Epoxy Coated Steel Pipe With Guaranteed Coating Properties

Product Name :DIN30670, DIN30671, Polyethylene coating Steel Pipe ,Fitting and Flanges Guaranteed coating properties DIN 30 670 - N

Polyethylene coating ø 159 - 820 mm

The installed line makes possible to coat pipes in the O.D. range 159 - 820 mm with the three-layer coating pursuant to the DIN 30 670 Standard in normal design (maximum operating temperature 50°C)
or in special design (operating temperature 80/90°C, increased surface hardness). Thus, it covers the entire assortment of the spiral welded pipes, part of the seamless tube assortment, and leaves the space for coating of pipes, supplied by other manufacturers

Grit-blasting machine

The grit blasting takes a course in the mechanical grit-blasting machine, equipped with two throwing wheels, operating with metal crushed material. The surface quality after grit-blasting corresponds to the SA 21/2 degree according to ISO 8501-1.

Induction heating

The mid-frequency induction heating has 750 kW output, which is sufficient for heating of 10 t of pipes per hour. By passing the pipe through the inducting coil, it is heated to the application temperature,
which is usually the temperature between 170 and 200 °C. The pipe temperature is continually measured by the infra-red sensor, and displayed on the control desk.

Pipe pre-heating

The whole line starts with the intake bed, from which the tubes are conveyed to the grit-blasting machine. Before the blasting itself, the tubes are heated by the natural gas burners to the temperature of 50-80 °C, that is sufficiently above the dew point temperature.

Visual inspection

After the grit blasting, the pipes undergo the visual inspection, during which possible surface defects are removed by grinding. The surface roughness is measured

Epoxy coating

The pipe enters the spraying booth, where the powdered epoxy is sprayed in the electrostatic field with 60 - 100 μm thickness, which melts down immediately, and cures during 30 - 60 seconds, whereby
a high adherence to the steel surface is reached.

Polyethylene application

Directly behind the spraying booth, there follows the application of the second layer - the so-called adhesive intermediate layer. This is the question of 250 μm thick adhesive layer, the function of which is
to create the chemical bond between the epoxy and upper polyethylene layer. Coating itself is done by forcing-out the adhesive substance through the extruder flat nozzle into the thin strip, which is wrapped
on the tube in semi-liquid condition.

Coating thickness measuring

Further, the coating thickness measuring is performed on the whole pipe length and surface, at 12 points at least. At the spiral-welded pipe, there are performed the additional 4 insulation measurements above the weld. The measurement is performed by the magnetic or ultrasonic apparatus. The Table shows the required values according to DIN 30 670 Standard.

Types and Features of Corrosion-resistant Steel Pipe

Best Alloy Engineering Alloy Pipe  as s a reference point for excellence in

the manufacture and distribution of fittings, piping, bends, forged flanges , clad products and specialties

for the upstream, midstream and downstream sectors of oil & gas, thermal and nuclear power generation.

The Company was founded in 1996 on the buttwelding fittings , forged flanges and steel pipes

with the aim of becoming a one-stop solution partner for their clients.

Best Alloy Engineering Alloy Pipe is one group company !

The company ’s business model is characterized by complete control of the supply chain, with

integrated production, stock and distribution operations. A strong market image reinforced by

genuine trust has enabled very rapid growth in all areas of the world.

It fixes assets of 8 million dollar, covers an area of 60,000 square meters.

In Best Alloy Pipe Engineering   , there are more than 150 employees

with strong technical faculty in our company ,including 15 engineers, and 16 technicians.

Owning advanced  flanges and tube supporting the production lines, the company has high technology skills in

forge and press, If push system, machining, cold forming, hot extrusion and heat treatment .

In addition, our factory also has the capabilities of chemical analysis, metallurgical analysis,

physical experiment, nondestructive testing and other advanced detection. Therefore, Best

Pipeline could produce different ranges of stainless steel, alloy steel, carbon steel flanges,

elbows, tees, reducers, caps, big bend, the socket series of pipeline components with high and

medium pressure, and various specifications, material steel pipe according to international and

domestic standards.

Best  Alloy Pipe   has a manufacturing license in the field of

the petroleum, petrochemical, chemical, shipbuilding and other industries. The products have been widely used

in marine, power generation, natural gas, chemicals, chemical, petroleum, pharmaceutical, coal, aviation,

construction, water supply and many other fields.

In 2003, the company has provided a lot of well-known foreign trade enterprises to the domestic

OEM products, and several foreign guests of audits and visits, which makes the company win the

domestic and foreign customers trust and praise. Along with the company's expansion command,

it has obtain the right to import and export goods in 2004, developing a direct business dealings

with Germany , Poland , Belgium , the United States, Russia, Australia, Brazil, Iran, Dubai, Paraguay,

Chile, Argentina, and more than 40 other countries. Now Best Pipeline has grown into a star company

gathered production, manufacturing, domestic and foreign sales of other diversified businesses.

Best Pipeline uses high-quality products and good service to establish a good corporation image

and good reputation, using a reasonable price to win customers’ trust and occupy the market.

The company will always insist on putting science and technology in the first and make every

effort to develop new product as customers’ requirements.

The company will always pursuit excellence along with the brilliant corporation spirit, and always

adhere to the purpose of "Quality first, Customer satisfaction", to provide customers with qualified

products and good service