BS EN 42CrMo4 Black Surface Alloy Steel Seamless Pipes With High Strength And Hardenability

Name : BS EN 42CrMo4 Chrome plated alloy seamless steel Pipes , It has higher strength and hardenability

BS EN 42crmo4 Alloy Steel is a common chromium-molybdenum steel that usually used after quenched and tempered, with high intensity, high hardenability. BS EN 42CrMo4 round steel has better performance than 34CrMo4 steel due to the carbon and chromium content is higher. 42CrMo4 alloy steel has higher strength and hardenability. The 42CrMo4 alloy material also has high fatigue strength and good low-temperature impact toughness .The temper brittleness is not obvious

Although 42CrMo4 steel is more expensive than 41Cr4 steel, it is more preferable in terms of material properties. EN 42CrMo4 alloy engineering steel materials have been widely used in automotive driving elements. Otai Steel is able to supply you prime quality of 42CrMo4 alloy steel materials with wide range.

1. 42CrMo4 Alloy Steel Supply Range

42CrMo4 Round bar Sizes: 10mm – 3000mm
Steel 42CrMo4 Flat and Plate: 10mm-1500mm thickness x 200-3000mm width
Other steel shape and sizes available according to your requirements.

Surface condition: Black, rough machined, peeled, turned or other requirements according to your requirements.

2. BS EN 42CrMo4 Alloy Steel Relevant Specifications and Equivalents

3. 42CrMo4 Alloy Steel Chemical Composition

4. DIN 42CrMo4 Alloy Steel Mechanical Properties

5. Heat Treatment of 42CrMo4 Steels

Annealing of 42CrMo4 Steels

• Heat steel 42CrMo4 forged steel slowly and thoroughly to 800-850°C;
• Cool slowly in the furnace to the temperature 480°;
• Complete annealing the steel in the air.

Quenched and Tempered (Q+T)

• Heat 42CrMo4 steel slowly to 880°C;
• Soak at this temperature then quench in oil;
• Temper as soon as 42CrMo4 steel reach room temperature (20°C);
• Heat uniformly to the suitable temperature of 560°C;
• Withdraw the 42CrMo4 material from the furnace and cool in the air.

6. Forging of 42CrMo4 Alloy Steel

• Preheat 42CrMo4 engineering steel uniformly and slowly;
• Increase the forging temperature up to 1150-1200°C.
• Always keep the forging temperature above at least 850°C

7. Weldability

Engineering steel 42CrMo4 has only limited weldability. Preheating to 200-300°C is strongly recommended; the upper limit should not be exceeded because of risk for deterioration of the chrome layer.

Alloy steel 42CrMo4 can be friction welded. However, precautions are necessary so as to limit the formation of undesirable microstructures in the welded zone.

8. Application of 42CrMo4 Alloy Steels

EN 42CrMo4 alloy steel is widely used for engineering steel purpose, such as: making various kinds of machinery, automobile, mining spare part, the gearwheel of the engine, the driving gear of supercharger, the connecting rob, the pinchock under the high pressure, parts for power train applications, cold formed fastener components, shafts, gears, drill collars for the oil exploration, etc.

42CRMO4 Stainless Pipes Shows

Best Alloy Engineering Alloy Pipe  as s a reference point for excellence in

the manufacture and distribution of fittings, piping, bends, forged flanges , clad products and specialties

for the upstream, midstream and downstream sectors of oil & gas, thermal and nuclear power generation.

The Company was founded in 1996 on the buttwelding fittings , forged flanges and steel pipes

with the aim of becoming a one-stop solution partner for their clients.

Best Alloy Engineering Alloy Pipe is one group company !

The company ’s business model is characterized by complete control of the supply chain, with

integrated production, stock and distribution operations. A strong market image reinforced by

genuine trust has enabled very rapid growth in all areas of the world.

It fixes assets of 8 million dollar, covers an area of 60,000 square meters.

In Best Alloy Pipe Engineering   , there are more than 150 employees

with strong technical faculty in our company ,including 15 engineers, and 16 technicians.

Owning advanced  flanges and tube supporting the production lines, the company has high technology skills in

forge and press, If push system, machining, cold forming, hot extrusion and heat treatment .

In addition, our factory also has the capabilities of chemical analysis, metallurgical analysis,

physical experiment, nondestructive testing and other advanced detection. Therefore, Best

Pipeline could produce different ranges of stainless steel, alloy steel, carbon steel flanges,

elbows, tees, reducers, caps, big bend, the socket series of pipeline components with high and

medium pressure, and various specifications, material steel pipe according to international and

domestic standards.

Best  Alloy Pipe   has a manufacturing license in the field of

the petroleum, petrochemical, chemical, shipbuilding and other industries. The products have been widely used

in marine, power generation, natural gas, chemicals, chemical, petroleum, pharmaceutical, coal, aviation,

construction, water supply and many other fields.

In 2003, the company has provided a lot of well-known foreign trade enterprises to the domestic

OEM products, and several foreign guests of audits and visits, which makes the company win the

domestic and foreign customers trust and praise. Along with the company's expansion command,

it has obtain the right to import and export goods in 2004, developing a direct business dealings

with Germany , Poland , Belgium , the United States, Russia, Australia, Brazil, Iran, Dubai, Paraguay,

Chile, Argentina, and more than 40 other countries. Now Best Pipeline has grown into a star company

gathered production, manufacturing, domestic and foreign sales of other diversified businesses.

Best Pipeline uses high-quality products and good service to establish a good corporation image

and good reputation, using a reasonable price to win customers’ trust and occupy the market.

The company will always insist on putting science and technology in the first and make every

effort to develop new product as customers’ requirements.

The company will always pursuit excellence along with the brilliant corporation spirit, and always

adhere to the purpose of "Quality first, Customer satisfaction", to provide customers with qualified

products and good service