
The 510 Inch Double Brushes For US Market Commercial Floor Cleaning
Machines With CE
Features.
1. Intelligent circuit round protection design: start function
self-test; water full blockage protection; the brush plate motor
protection; short circuit protection; battery indicator and low
battery protection.
2. AMETEK motor and V-shape squeegee-powerful suction,no stains or
waste water left on floor tiles even in a supermarket or a
McDonald’s.
3. The water scraping electronic automatic movements, intelligent
control.
4. high-quality wearable brush plate, saving the cost of wearing
parts.high-quality wearable brush plate, saving the cost of wearing
parts.
5. Apply to factory workshop, property cleaning, supermarket, airport
Metro etc.
6. High cleaning efficiency, save time and effort, 5200sq.m/h work
efficiency, cleaning effect is more clean
7. Double brush design, sweeping the floor drastically
8. Humanized cup holder, comfortable work, two without mistake
9. 4 pcs of 6V 225AH, high-end high-capacity maintenance-free
battery, working time up to 4 to 6 hours, the time is 1.5 times
than that of the imported brands.
10. Various stains wash dry powder, dirt, oil, dust, mildew, skid
marks,
D9 is the biggest model in FS series, it is a stable model.the
cleaning width is 1160mm,and it equiped with two 20in brushes 50L
solution tank and 180 L recovery fit for more 5000 sq.m area.it
especially suit for larger and openner hard floor because of it is
shape. the application can be hospital,hotal,airport,and
warehouse.it performs great in cleaning.all the models in FS series
allow to add degergent
For warehouse,there will always be a lot of dust ,oli or
powder,moreover,The warehouse is usually large in size,so it is not
suitable to use handheld floor scrubber, because its efficiency is
relatively low,we have three kinds of ride-on floor scrubber for
different area warehosue.D9 floor scrubber is the max
brush dia(mm) | 850(2*510) | squeegee width(mm) | 1160 |
solutio tank(L) | 150 | recovery tank(L) | 180 |
brush driving mode | metal gear reduce | brush speed(rpm) | 180 |
brush motor(w) | 500*2 | suction motor(w) | 550 |
traction motor(w) | 850 | driving system | driving |
efficiency(m2/h) | 5200 | driving speed(km/h) | 5-7 |
installed power | 24v | battery(v/ah) | 6v*4 200 |
addtional pressure for brush | - | one key control | yes |
dirty water level sensor | yes | driving speed adjust | - |
solution level checking hose | yes | electromagetic valve device | optional |
on board charge | optional | dimension | 1690*1050*1400 |
Application:
It is applicable to supermarkets, warehouses, hospitals, sports centers, airports, parking lots, the food industry and other large-area places which have high requirements for cleaning.
This product is an indispensable and ideal electrical machinery for cleaning floor.
It is applied to clean the grounds of large plaza, supermarkets, airports, factories, warehouses and so on.
1.The most economical and the fastest cleaning equipment which can create huge economic benefits.
2. Silence design, especially suitable for hospitals and other places.
3. One charge can support five and a half hours continuous work.
4. The smallest turning diameter, so it can work in narrow areas and corners
Shipping:
By Sea:Delivery from Shanghai Seaport
By Air:Departure from Shanghai Airport
By Express:Post by DHL, FEDEX, UPS, TNT
Hard ground can be divided into:
Stone surfaces including marble floors, granite floors, etc.
Cement floor - including concrete floor, terrazzo floor, etc.
Plastic flooring - including PVC flooring, epoxy flooring, etc.
Wooden floor - including logs, ground, composite wood, floors, floors, etc.
Dycon Cleantec Co.,Ltd
Dycon Cleantec Co.,Ltd.., is the professional producer for floor
scrubber dryer in China, also the member of the ISSA(Worldwide
Cleaning Industry Association).Dycon is committed to R&D and
producing cleaning equipments, with independent product development
capability. We are also accept OEM and ODM product development.
Dycon focuses on designing and producing floor scrubber dryer, pay
attention to quality. All the machines are designed by our own, the
metal chassis is cutting by Laser, which brings precision and high
interchangeability of spare parts. Our products absorbs the
international mainstream product advantages, synchronized with
worldwide style. With CE approved, our products enjoy a good
reputation in the America, Eastern Europe, Oceania, Southeast Asia
etc. markets. And we hope to provide our service to more customers
around the world.
Here in Dycon, we consider customer's interests, customer's demand
as the center, cooperating with Dycon, you will obtain a good
regional protection ,qualified product, good service, also you will
have a continuous development of product platform.
Dycon is your trust partner, join our dealer team, you will obtain
more.