
Description:
Feature :
The drying speed is high when the material liquid is atomized, the
surface area of the material will increase greatly. In the hot-air
flow, 95%-98% of water can be evaporated at a moment. The time of
completing the drying is only several seconds. This is especially
suitable for drying the heat sensitive materials. Its final
products own the good uniformity, flow ability & solubility.
And the final products are high in purity and good in quality. The
production procedures are simple and the operation and control are
easy. The liquid with moisture contents of 40-60% (for special
materials, the contents might be up to 90%.)can be dried into the
powder or particle products once a time. After the drying process,
there is no need for smashing and sorting, so as to reduce the
operation procedures in the production and to enhance the product
purity. The product particle diameters, looseness and water
contents can be adjusted through changing the operation condition
within a certain range.
ed centrifugal sprayer on the top of the tower, the material liquid
will rotate and be sprayed into the extremely fine mist liquid
beads. Through very short time of contacting the heat air, the
materials can be dried into the final products. The final products
will be discharged continuously from the bottom of the drying tower
and from the cyclones. The waste gas will be discharged from
blower.
Type | LPG | ||||||
5 | 25 | 50 | 100 | 150 | 200-3000 | ||
Inlet temperature | ≤ 350°C | ||||||
Outlet temperature | 80-90°C | ||||||
evaporate capacity (kg/h) | 5 | 25 | 50 | 100 | 150 | 200-3000 | |
driving type | compressed air drive | mechanical drive | |||||
Rotate speed | 25000 | 22000 | 21500 | 18000 | 18000 | 15000 | |
diameter of atomizer tray (mm) | 50 | 120 | 120 | 120 | 150 | 180-340 | |
heating source | electricity | electricity | electricity +steam+fuel oil+coal gas | electricity +steam | electricity +steam+fuel oil+coal gas | To be solved by users | |
Electric-heating power (kw) | 9 | 45 | 60 | 81 | 99 | ||
Dried powder recovery rate (%) | ≥ 95 | ≥ 95 | ≥ 95 | ≥ 95 | ≥ 95 | ≥ 95 | |
Installation size | A(mm) | 1000 | 1290 | 1730 | 2500 | 2800 | according to practical needs |
B(mm) | 2100 | 3410 | 4245 | 5300 | 6000 | ||
C(mm) | 2300 | 4260 | 4645 | 6000 | 6700 | ||
φ D(mm) | 1060 | 1800 | 2133 | 2560 | 2860 | ||
E1(mm) | 1050 | 1200 | 1640 | 2100 | 2180 | ||
E2(mm) | 1050 | 1200 | 1640 | 2100 | 2180 | ||
F(mm) | 750 | 1000 | 1250 | 1750 | 1970 | ||
G(mm) | 530 | 1700 | 1750 | 1930 | 2080 | ||
H(mm) | 530 | 1300 | 1800 | 2600 | 3050 | ||
I(mm) | 530 | 1550 | 1600 | 1780 | 1960 |
Changzhou Yibu Drying Equipment Co., Ltd