S SERIES Personnel Entry Cleanroom Air Shower With 22-25m/S Wind Speed

S SERIES Personnel Entry Clean Air Shower With Auto Stainless Steel Sliding Doors

Hidden Doors:Automatic Single Leaf Sliding Doors

Width: 800mm

Air shower for materials.pdf

Description:

Air Shower Tunnel have become an integral component of the modern cleanroom because their benefits

more than pay for the small amount of space they occupy. With their interlocking doors and automatic

cycling, air showers act as traffic guards, controlling passage into and out of the cleanroom.

Designed to remove surface contamination from personnel entering a cleanroom.

Shower is automatically actuated upon entry-releasing a bath of clean air from the side walls and ceiling.

After a timed duration, the shower shuts off and allows exit. The HEPA filtered air is 99.99% efficient on .3 microns, and is recirculated for containment.

Available in two configurations: Model S (straight-thru, illustrated), and model L (providing right angle passage).

Parts Pass Hhru Air Showers also available

Air Shower Specifications

Filter: Twelve inch HEPA (High Efficiency Particulate Air) type, PSL challenged, zero probed. Minimum efficiency of 99.99% at .3 microns.

Pre-filter: One inch bonded polyfiber media minimizes surface-loading. Low wall return to HEPA filter atop unit. Quick release grille.

Blowing type: single-side blowing, double-side blowing, three-side blowing.

Operation Instruction

1.Put air shower on the correct location, connect the power wires of air shower with the power wires,

There are FIVE lines: 3*Live line, 1*Null line and 1*Earth line. The power supply is AC380V/50HZ/3 phases.

2. In order to make sure air shower to work normally and the cleanliness of workshop, please kindly use air shower according to the following correct method.

2.1 Please check if there are any people in air shower before you enter it. When air shower is working entrance door and exit door are electronic interlocked, it is forbidden to open the door at this moment.

2.2 Put hand toward to Open switch, the entrance sliding door will open , enter air shower, then entrance sliding door will be close automatically, photoelectric sensor is reacted by people or goods, blower fan will be

blowing automatically (The air shower time is set 15seconds at factory, it is forbidden to change the air shower time during blowing), after blowing, exit sliding door open automatically, go out air shower,

then exit sliding door will be close automatically.

Parameter:

Size and specificaton:

Air shower tunnel picture:

Drawing of Air Shower Tunnel

Can custom air showers be manufactured?

We offers both standard and custom air showers. Please contact us for more information.

Is it possible to alter the settings on the air shower?

Our air showers allow the operator flexibility to program numerous settings using an easy-to-use touch-screen control panel. You can easily set cycle operation times, entrance/exit delays, when the lights turn off/on, and more.

Testing in factory:

All of equipment will be individually tested for safety and performance in accordance with international Standards before shipment.

Each unit is shipped with a documentation outlining the tests undertaken and the units individual results for each unit.

Testing before shipment:

1. Appearance inspection

2. Electrical safety tests

3. Air wind speed testing

4. Function testing

Warranty:

The warranty of our equipment is for 1 year, but excluding consumable parts and accessories.

All equipment is shipped with a comprehensive use’s manual with testing report.

Additional IO/OQ/GMP document is available upon request.

Contact our sales representative for specific warranty details or document request.

Replacement parts:

1. HEPA filter: It should be changed in half or one year once.

2. Pre filter: It should be changed in 3-6 month once.

Why you choose ZHISHENG Company ?

Professional service:

Fast reply in 12 hours if we receive any inquiry or request from customer

Familiar with equipment.

Technician or enginner can go to Southeast Asian countries for guiding insallation of machines. Like Thailand, Vietnam, Philipines, Malaysia and so on.

Delivery time:

• Production period:15-30days

• Shipping notice or insurance for you after the goods is shipped.

After sales service:

• We respect your feed back after receive the goods.

• We provide 1 year warranty after goods arrive.

• We promise all spare parts available in lifetime use.

• We care of your complain within 48hours.

Payment Term:

30% prepayment by T/T at order, the balance of payment before shipment.

Cleanroom equipments,like air shower, FFU. It is one-year warranty.

Dongguan Zhisheng（Lihong） Purification Technology Co., Ltd. is builded in 1997, we are specialized in manufacturing clean room equipments, like air shower, air shower tunnels, Fan Filter unit(FFU), Pass Box,  Clean Bench, Laminar Flow cabinet, clean booth, various sole cleaning machines and boot washer,  various air filters including HEPA filters, fine filters, V type filter, medium filter, pocket filters and Pre-filter and other filters,  and HVAC air diffusers, air grilles and volume control dampers.

We make our products strictly in accordance with state standards. With the top-graded product quality in the industry, our company enjoys great reputation among the customers all over the country. Our products are also exported to Europe, North America, Middle East, Southeast Asia and other countries.

Clean room equipment include air shower, clean bench, FFU,pass box, pass box with air shower, clean booth etc.

Air filters include primary, medium, HEPA filter, Replacement filter for Projector and Air Purifier.

Our HEPA filter has passed the tests of National Center of Quality Supervision and Inspection and Testing for Air Conditioning equipment.

The purifying equipment are in conformity with GB5007-2001 Design Code of Cleaning workshop. Our wide range of air purifying product will surely satisfy different engineering requirements of different purifying grades.

We also supply shoe sole cleaning machines, Hand wash stations, boot washers,wash tanks and  hygiene station machines and stainless steel products for clean room and food factories.

HVAC products include air diffuser, air grille, air louver, air damper, pressure damper, Sound absorber and other accessory parts for air-conditioners. They are widely applied in many large-scale projects and win consistent high praise of our customers because of the superior quality and delicate crafts

We develop new products for pharmacy and hospital, like dispensing room, dynamic pass box, Electric sliding door and swing door for hospital, Laminar flow air supply ceiling,drug cabinet, instruction cabinet ,Wash hand sink, Liquid crystal light and so on.

Adhering to the operation tenet of Honesty Service and Pursue Perfection, our skillful and high quality employees will produce the best and most reliable products with advanced processing equipment and excellent materials. Comprehensive and prefect after-sales services will be available to customers. We are committed to provide the best products and comprehensive services to all customers.

We have Lasing cutting machine, Bending machine, Punching machine, these new machines makes sure the good-looking and superior quality for the machines.

Our workers have been more than 10 year experience in welding , and they have good skills to make sure the quality of machine.

Besides, we have R & D team, we have 5 engineer to design and develop the new product and selove the techncial issues of the machines.

Websites: www.cleanroom-airshower.com

Email: sales@cleanroom-airshower.com; sales-guo@zsfilters.com

Whatsapp(wechat): 86-13712072567