Professional ASME SA556 Seamless Alloy Steel Tube / Ss Seamless Pipe

ASME SA556 Seamless cold drawn carbon steel feedwater heater tubes

Standard: ASTM A556 / ASME SA556

Steel grade: Carbon steel

Material shall conform to the applicable requirements of specification A450/A450M

The tubes are mainly delivered in the form of U-tubes.

Process: cold drawn

The tubes cover minimum wall thickness.

Application: Tubular feedwater heaters

Dimensional range:

OD: 15.9-31.8mm

Any specific size is to be discussed before offer

The tube be 100% eddy current tested

Ultrasonic test is as option

Straightness ≤1mm/1000mm

Roughness: Ra ≤0.8

Surface quality

• Finished tubes shall be free from scale but may have a superficial oxide film on the surfaces. A light oxide scale on the outside and inside surfaces of U-bend shall be allowed for tubes which have been heat treated.
• Finished tubes shall be reasonably straight and have smooth ends free from burrs. Tubes shall have a workmanlike finish and shall be free of surface imperfections that cannot be removed within the allowable wall tolerances. Removal of surface imperfections such as handling marks, straightening marks, light mandrel and die marks, shallow pits, and scale pattern will not be required provided they are within the allowable wall tolerances.
• Finished tubes shall be coated both on the outside and the inside diameter to prevent corrosion in transit. The type of coating applied should be mutually agreed upon and specified in the order.

Test

• One tension test shall be made on a specimen for lots of not more than 50 tubes. Tension tests shall be made on specimens from two tubes for lots of more than 50 tubes.
• One flattening test shall be made on specimens taken from each end of one finished tube, not the one used for the flaring test, from each lot of not more than 125 tubes or fraction thereof.
• One flaring test shall be made on specimens taken from each end of one finished tube, not the one used for flattening test, from each lot of not more than 125 tubes or fraction thereof.
• Brinell or Rockwell hardness tests shall be made on specimens from two tubes from each lot
• Each U-tube shall be subjected to a hydrostatic test, using a noncorrosive fluid, or when agreed upon between the purchaser and manufacturer, they may be tested at 11⁄2 times the specified design working pressure.
• Each tube shall be tested after the finish heat treatment following the final cold-drawn pass by passing through a nondestructive tester capable of detecting defects on the entire cross section of the tube, in accordance with Specification A 450/A 450M.

Mechanical properties

Packing and marking

• Tubes shall delivered with square cut ends. The ends are free of excessive burrs.
• The tubing shall be packaged or bundled in such a manner as to prevent damage in ordinary handling and transportation and identified by a tag with the name of the manufacturer, purchase order number, specification number and grade, and size.
• In the case of U-tubes, each box shall be palletized and legibly marked showing the manufacturer’s name, purchase order number, specification number and grade, size, and identification of items contained.
• Bar coding – In addition to the requirements in above two items, bar coding is acceptable as a supplemental identification method. The purchaser may specify in the order a specific bar coding system to be used.
• The case is most suitable for hanging by forklift.

EN10204-3.1 MTC shall be issued

EN10204-3.2 MTC is as option

Zhangjiagang Bonded Area Yaxin Precision Tube Co., Ltd.

Zhangjiagang Bonded Area Henglong Steel Tube Co., Ltd.

Long-term adherence strict quality control, uphold the "scientific management to create first-class products, promote the comprehensive development of continuous improvement, quality service to win customer satisfaction," the quality and continuously forge ahead, creating enterprise independent quality brand; uphold the integrity of the first with partners closely aligned. We sincerely hope that the friendly cooperation with the community, work together!

Zhangjiagang bonded zone Yaxin precision pipe making Co., Ltd., Zhangjiagang bonded zone Yaxin Auto Parts Technology Co., Ltd.

Zhangjiagang Free Trade Zone Yaxin Precision Steel Pipe Co.,Ltd.and Zhangjiagang Free Trade Zone Yaxin Auto Parts Technology Co.,Ltd.is a Sino-foreign joint venture company,established in 1999,located at Taiwan Road,Free Trade Zone,Zshangjiagang City,jiangsu Province.It is borderend by international mertropolis city-Shanghai to the east,the beautiful ancient city Suzhou to the south ,jiangyin Changjiang River Bridge to the west ,and international port-Zhangjiagang port to the north.The company covers the area of 200000㎡，of which constructiong area is 8500㎡ ,is has 15 million U.S.dollars (about 96 millon RMB)of registered capital,260million RMB of fixed assets,and its annual output is 30,000 tons of precision seamiess steel pipe ,precision welded pipe 50,000 tons.The company currently employs 500 people ,of which more than 60 have higher education ,more than twenty have senior titles or above .Our main products are cold rolled and cold drawn precision seamless steel pipes ,of which more steel pipes for automobile,Precision welded pipe for automobile.
The company has eamed great reputation among many well-known large business customers by our modern hardware facilities,independent designed special mould and unique production process;and by our standardized managenmen and strict management procedures;and by our business philosophy of"Honesty ,cooperation andcommon development".Our products are widely used by Shanghai Huizhong Sachs Shock Absoorber Co.,Sacths Automotive Components Systems (shanghai)Co.,Ltd.,ZF Chassis Technology-rich Mining Austria (Changchun)Co.,Ltd.,dongfeng ZF Shock Absonrher Co.,Ltd,Shanghai Huizhong Automotive Manufactuing Co.,Ltd.,FAW Tokico Shock Absorber Ltd.,Zhuzhou Nanfang Yamaha Shock Absorter Co.,Tenneco(Beijing)Co.,Ltd.
The company passed the ISO9001 quality system certification in 2008 ,obtained Special equipment manufacturing license(TS2710J44-2013)in 2009,Passed PED certified of TUV NORD in 2011,passed ISO14001 and OHSAS18001 management system certification of DNV in 2012,and was rated as a high-tech enterprise in 2013.Under the fierce market competition ,the company closely centers around the quality policy of"creating first-class products by scientific management,promoting overall development by contstant improvement and satisfying to the custorners"tokeep forging ahead ,further perfecing all kinds of equipments to dvelop the high quality brand for the company.
The company sincerely hopes that we can get friendly cooperation with all circles of the community.

Zhangjiagang Bonded Area Henglong Steel Tubes Co., Ltd.

Zhangjiagang Bonded Area Henglong Steel Tubes Co., Ltd. is a Sino-foreign joint ventrue company,estabilshed in 1999,located at Taiwan Road,Free Trade Zone,Zhangjiagang City,Jiangsu Province.It is bordered by internationgal metropolis city-Shanghai to the east,the beautiful ancient city Suzhou to the south ,Jiangyin Changjiang River Bridge to the west ,and internationgal port-Zhangjiagang port to the north .It embraces convenient land and water transportation,hospitable weather,god-blessed land rich in culture and talented people .Thereby the company enjoys a great geographical advantage.The company covers the area of 200000㎡，of which construction area is 8500㎡.It has 15 million U.S.dollars (about 96 million RMB)of registered capital,260million RMBof fixed assets,and its annual output is 145,000 tons of seamlell steel pipes.
The Company specializes in producing various types of steel,such as10、20、20G、35、45、16Mn、ST52、40Cr、37Mn5、D9MnD、40Mn2、15CrMoG、12Cr1MoVG、08Cr2ALMo、12CrMo1、T11、T12、T22、T23、T5、T9、SA179、SA192、SA106B、SA210C.Main prouducts are different types of seamless steel pipes ,for example ,steel pipes for structure,fou transmission fluid,for low and medium pressure boiler,for petrleum cracking ,for high pressure fertilizer equipment ,high pressure boiler.The outer diameter of the pipe is from 6 to 133mm,wall thickness is from 0.5 to 16mm.Our products are widely used in industry of machinery manufacturing ,ship engineering ,petrochemical,and pressrue boiler.
The company has eamed great reputaion among many well-known large business customers by our modern hardware facilities,independent designed sepcial mould and unique production process;and by our standardized management and strict management procedures;and by our business philosophy of"Honesty,cooperation and common development".
The company passed the ISO9001 quality system certification in 2008,obtained Special Equipment Manufacturing License(ts2710j44-2013)in 2009,passed PED certified of TUVNORDin2011,passed ISO14001and OHSAS18001management system certification of DNV ,AND was rated as a high-tech enterprise in2012.Unedr the fierce market competition,the company closely centers around the quality policy of"creating first-class products by scientific management ,promoting overall development by constant improvement and satisfying the customers"to keep forging ahead,fruther perfecting all kinds of equipment to develop the high quality brand for the company.The company sincerely hopes that we can get the friendly cooperation with all circles of the community.