
Specifications: | AFCT-57V6USZ |
Product Class: | Fiber Optics |
Product Family: | Optical Transceivers |
Product Series: | SFP |
Product Name: | SFP Optical Transceivers |
Status Available: | Active |
RoHS: | RoHS-6 Compliance |
Specifications: | |
Data Rate: | 1.25 Gbps |
Wavelength: | 1550nm |
Maximun Distance: | 80000m |
Fiber Type: | Singlemode Glass |
Emitter: | DWDM EML |
Voltage-Supply: | 3.3V |
Applications: | Ethernet |
Connector Type: | LC Duplex |
Mounting Type: | Pluggable,SFP |
Lead Free Status / RoHS Status: | Lead Free / RoHS Compliant |
Moisture Sensitivity Level(MSL): | 1 (Unlimited) |
Feature Description: |
• Gigabit Ethernet transceiver
• RoHS Compliant
• IEEE 802.3z, 1000BASE-ZX
• Extended transmission distance up to 40 km
• Compliant with SFP Multi Source Agreement (MSA)
• Duplex-LC optical interface
• 1550 nm DFB-LD
• Serial ID
• Digital Diagnostic Monitoring interface
• Bail delatch for easy removal from cage
• Available in industrial temperature range(-40 to +85°C)
• Immune to ESD, RF fields, and Vcc noise
• Designed for very low RF emissions
• Class 1 laser safety
• AC-coupled differential serial I/O interface
• Single +3.3 Volt supply operation
• Low power dissipation
Optical Description: |
• Table 4 describes the performance of the transmitter portion of the AFCT-57V6USZ over the operating conditions. Table 5 describes the performance of the receiver portion of the AFCT-57V6USZ over the operating conditions. The optical pulse characteristics of the transmitter are specified in the form of an eye pattern. When measured in accordance with [2], the mask shown in Figure 2 evaluates rise time, fall time, overshoot and undershoot.
Feature Description: |
• The supply current of the AFCT-57V6USZ is described in Table 6 below. The inrush current is defined as the additional inrush due to hot plugging.
• The characteristics for the control and status signals are shown in Table 7. Output status signals, TX_FAULT and RX_LOS, are all open-collector/drain, and the levels indicated assuming 4.7k-10k ohm pull-up resistor to Host_Vcc is present. The levels of MOD_DEF[1] and MOD_DEF[2] are also indicated assuming that they are pulled up with a 4.7k-10k ohm resistor to +3.3 V on host board. Table 8 indicates the voltage levels required to be delivered by the host to the transmitter differential serial data input TD+/-. Table 9 indicates the voltage level output from the receiver differential serial data output RD+/-.
LINK-PP INT'L TECHNOLOGY CO., LIMITED
LINK-PP is a professional designer and Manufacturer of magnetic telecom and networking components. Founded in Shenzhen in 1997 and began to develop Discrete Transformer. With over 26 years of experience in innovation and technology leadership. Our main products include RJ45 Connectors, LAN Transformers, and SFP Modules. We focus on improving product reliability and durability.
With a global customer base covering Communications, Consumer, Industrial, and IoT industries. Our products are integral to a wide range of devices, from HUBs and PC cards to Switches, Routers, and more.
LINK-PP is a global supplier for OEMs, contract manufacturers, and CEMs. Standard catalog magnetics and custom solutions are available. With more than two decades of innovation, LINK-PP continues to lead the way in technology, design and manufacturing.
Main Production Lines
◆ 10/100/1000/10GBase-T LAN Isolation Transformer and Filter
◆ Rj45 Modular Jack With Integrated 10/100/1000/10G Magnetics
◆ Magnetic Rj45 Jack with POE/ POE+; IEEE823.3af/ IEEE802.3at
◆ LAN Transformer With POE/ POE+; IEEE823.3af/ IEEE802.3at
◆ T1/E1,T3/DS3/E3/STS-1 Interface LAN transformer
◆ ISDN,HDSL,ADSL and VDSL Transformer and splitter
◆ Optical Transceivers