AC220V / DC26-28V IED Jammer / Bomb Jamming Equipment With Electromagnetic Energy

Portable Full Frequency Range Radio Frequency Jamming System for Bomb Disposal

Introduction

The Bomb Jammer ™ series of IED Jammers are designed to saturate an area with electromagnetic

energy in order to neutralize an IED that is activated by remote control on command. Our IED Jammers

work by preventing radio signals from reaching the radio trigger used to detonate that IED.

Because the IED Jammer can broadcast RF Jamming interference on multiple frequencies

simultaneously, all known threats can be addressed. The Bomb Jammer ™ in its trunk mounted form

as well as the roof mounted version were not designed to detonate IED weapons. The sole purpose of

an IED Jammer is to jam only. RCIED or Radio Controlled Improvised Explosive Device weapons are

on command bombs that require a trigger by radio control, and as such, are almost always designed to

detonate with some basic radio frequency coding. This coding prevents accidental activation by random

radio frequencies it might receive.

The IED Jammer series are designed to jam using electromagnetic energy and not detonate a remote

controlled IED or RCIED.

Users of our IED Jammers, Communication Jammers, and RF Jammers range from mine clearance

teams, military forces, border patrol, bomb detection teams, VIP security forces, Law Enforcement

Agencies, EOD technicians, Government Contractors, and Government Agencies.

Function

This Jamming equipment is specially design to against electronic warfare. The system interfere the

wireless remote control device, mobile phones or other wireless devices signals, interrupt wireless

remote control explosive device so that it cannot be activate, etc. Mainly used for EOD specialist

personnel when transfer or disposal of suspicious explosive articles, or to protect important figures,

special stadium venues, private meetings, etc. It is the necessary equipment for the EOD, SWAT and

CAT special commando when operating IED disposal missions. It is also the crucial equipment when

radio signal interference required in a special event.

Specifications

1. Frequency Bandwidth, Power output and jamming target:

2. System operation: Remote control handles

3. Power Output: 230W

4. Power Consumption: MAX 1150W

5. Power compatible: AC220V / DC26-28V

6. Battery comply with GJB157A standards

7. DC Current input: 40Amps@28VDC

8. Operation time: unrestricted (~ Hours) Internal battery can support the system continuously working

for 70-80 minutes.

9. Reliability and serviceability requirements: MTBF≥1000 Hours,MTTR≤1 Hours.

10. Jamming method: Frequency band Blocking, sweep

11. Operation methods: sweep, toiletry spectrum and direct sequence spread spectrum in combination

12. Operation modes: full band mode of operation to meet the situation requirements.

13. System protection: RF output no-load and short-circuit protection; internal power system has overload and short-circuit protection, etc.

14. Main Unit Weight: 40Kg

15. Main Unit Dimensions: (Pelican Case): 724 x 441 x 267mm.

Company Introduction

In 2008, Beijing Hewei Yongtai Technology Co., LTD was established in Beijing.Focus on the development and operation of special safety equipment, mainly serve the public security law, armed police, military, customs and other national security departments.

In 2010, Jiangsu Hewei Police Equipment Manufacturing Co., LTD was established in Guannan.Covering an area of 9000 square meters of workshop and office building, it aims to build a first-class special safety equipment research and development base in China.

In 2015, a military-police Reserch and development center was set up in Shenzhen.Focus on the development of special safety equipment, has developed more than 200 kinds of professional safety equipment.

Staff from Headquarters

Staff from Shenzhen research centre

About Us

Beijing Heweiyongtai Sci & Tech Co., Ltd. was established in the beginning of 2008. We are a hi-tech enterprise specializing in supplying and trading Security Inspection equipment, EOD equipment, Anti-terrorism equipment, Intelligence device, etc. Our products are widely applied in public security bureau, military, custom, government security agency, airport, exhibition, etc.

Our company headquarters and showroom are located in Beijing, the capital of China. There are more than 400㎡ showing room where exhibits nearly hundred kinds of well-equipped products and equipments. Our staff are all qualified technical and managerial professionals to provide you satisfied service.

Our main products and equipments are as follows, and is increasing:

★EOD Equipment
★Security Inspection Equipment

★Anti Terrorism Equipment

★Investigation Equipment

Our factory Jiangsu Hewei Police Equipment Manufacturing Co.,Ltd was established in the year 2010.

We establised research centre and factory in Shenzhen in the year of 2014.

Overseas Exhibitions

If have any inquiries about our company or products, please contact the following information.