
1.10/100 Base-T Without LEDS With EMI-Finger
2.1X1 Single Port Tab-down
3.Through hole RJ45 modular jack
4.21.3mm length RJ45 Magjack
5.6605412-3【Designing Model】== > LPJ0114DNL【Mass Production Model】
Description:
1X1 RJ45 Magjack with/without leds, meeting IEEE 802.3af/at
1. Product Type Features:
1) Product Type = Connector
2) Jack Type = RJ45
3) Profile = Standard
4) PCB Mounting Orientation = Side Entry (Right Angle)/Top
Entry(Vertical)
2. Mechanical Attachment:
1) Jack Configuration = 1 x 1
3. Electrical Characteristics:
1) Shielded = Yes
4. Termination Related Features:
1) EMI Finger - Bottom = Without
2) Termination Method = Solder
5. Body Related Features:
1) Port Configuration = Single/Multi
2) EMI Fingers -Top and Sides = With/ Without
3) Latch Orientation = Standard - Latch Down
4) PCB Tail Length
6. Contact Related Features:
1) Preloaded = Yes
2) Contact Termination Type = Through Hole/Surface Mount
7. Housing Related Features:
1) Connector Style = Jack
8. Industry Standards:
1) RoHS/ELV Compliance = RoHS compliant, ELV compliant
2) Lead Free Solder Processes = Wave solder capable to 240°C,
Wave solder capable to 260°C, Wave solder capable to 265°C
3) RoHS/ELV Compliance History = Always was RoHS compliant
9. Identification Marking:
1) Left LED Color (Position #1) = Green - 250 ohm resistor
2) Right LED Color (Position #2) = Green - 250 ohm resistor
10. Conditions for Usage:
1) Applies To = Printed Circuit Board
2) Environmental Conditions = Office / Premises
3) Operating Temperature (°C ) = 0 - 70/-40 - +85
Applications:
Used for networking and communication equipments such as HUB, PC card, Switch, Router, PC Mainboard, SDH, PDH, IP Phone, xDSL modem,Call Center solutions , Complex set top boxes , VOIP gateways setup,Border Gateway Protocol,fast ethernet switch ...
Competitive Advantage:
18 years production experience,
2600 staff,
100% test
Flexible delivery time
Main Customer:
Ti , Intel , Samsung , Fluke , Jabil , Flextronics ,Cypress, Freescale.......
LINK-PP INT'L TECHNOLOGY CO., LIMITED
LINK-PP is a professional designer and Manufacturer of magnetic telecom and networking components. Founded in Shenzhen in 1997 and began to develop Discrete Transformer. With over 26 years of experience in innovation and technology leadership. Our main products include RJ45 Connectors, LAN Transformers, and SFP Modules. We focus on improving product reliability and durability.
With a global customer base covering Communications, Consumer, Industrial, and IoT industries. Our products are integral to a wide range of devices, from HUBs and PC cards to Switches, Routers, and more.
LINK-PP is a global supplier for OEMs, contract manufacturers, and CEMs. Standard catalog magnetics and custom solutions are available. With more than two decades of innovation, LINK-PP continues to lead the way in technology, design and manufacturing.
Main Production Lines
◆ 10/100/1000/10GBase-T LAN Isolation Transformer and Filter
◆ Rj45 Modular Jack With Integrated 10/100/1000/10G Magnetics
◆ Magnetic Rj45 Jack with POE/ POE+; IEEE823.3af/ IEEE802.3at
◆ LAN Transformer With POE/ POE+; IEEE823.3af/ IEEE802.3at
◆ T1/E1,T3/DS3/E3/STS-1 Interface LAN transformer
◆ ISDN,HDSL,ADSL and VDSL Transformer and splitter
◆ Optical Transceivers